Compacfoam supports a wide range of applications where structural support and the possibility of obtaining secure fixings into the material are required.

* Can be used as a replacement for timber battens in these applications, where thermal bridging is to be reduced

* High compressive strength with good screw pull-out resistance and easy to drill & saw

* Available with Parabond 600, a fast curing, elastic white adhesive with high initial bonding strength suitable for securing Compacfoam to building materials and itself

* Thermal insulation for window and door thresholds

* Support for window and door frames to reduce thermal bridging

* Fixing points in external wall insulation systems (EWI) — e.g., for downpipes and fixtures.

• Modulus of elasticity in linear-elastic range (E-Module): 102 N/mm2
• Recommended stress level (under service load): 1.01 N/mm2
• Water vapour diffusion resistance factor: 25
• Maximum water absorptive capacity during complete submersion: 5-10%
• Material behaviour in response to fire, according to EN 13501: Euroclass E
• Elongation at maximum force (maximum strain at failure load): >10%
• Final creep rate (anticipated long-term deformation at serviceability limit state: <3%